Electro-Boiler Industrial Series

Residential Products
Commercial Products
Electric Utility
Dealer Support
OEM Manufacturing

60 - 300 kW

Industrial Boiler photoElectro-Boiler Industrial Series

Electro Industries’ Industrial boilers are a very compact and an effective solution to retrofitting old, inefficient fossil fuel boilers, or for use in new installations.

Safety is one major benefit of these boilers. Several state electrical jurisdictions are requiring the Bender Insulation Monitor device (ground fault) for increased operating safety, personal protection and reliability of the boiler. Secondly, there are individual circuit breakers for each heating element, further increasing the safety and reliability of our boilers.

Each boiler also includes built-in digital supply, return, and outdoor temperature sensors, enabling you to internally set and maintain the correct system design temperature, simplifying the installation process.

Features & Benefits

  • ASME and CSA/UL listed
  • Vessel boasts a large 40-gallon capacity
  • Outdoor reset
  • Disconnect circuit breakers for each heating element
  • Pressure vessel built in accordance with the requirements of the ASME Boiler and Pressure Vessel Code
  • Compact, can easily fit through service doors
  • No minimum return water temperature required
  • 5-year vessel warranty
  • 0-10VDC terminal enabling control of boiler via building automation system, etc.
  • Software and interface cable for setup, monitoring, and troubleshooting

Standard Equipment

  • Circuit breakers, each stage
  • Manual reset hi-limit - 220° F
  • Auto reset limit control - 210° F
  • Low water cut-off with manual reset
  • ASME pressure relief valve, 30 psi
  • Pressure/temperature gauge
  • Drain pipe
  • 3” NPT inlet and outlet, with inspection opening
  • Incoloy sheathed heating elements
  • Built-in load management controls, vessel top screw-in
  • Staging indicator lights, at contactor
  • Main supply circuit lugs
  • Safety door interlock and lockable door latch

Control Box includes:

  • Contains all boiler controls and adjustments
  • Bender fault monitor (optional)
  • Manual reset low water cut-off
  • Hi-limit reset button
  • Temp Sensing & Alarm board
  • T775R controller (optional)
  • Alarm and alarm LED’s
  • Sequencer up to 15 stages
  • Progressive staging delay time

Available Models:

600-Volt Three-phase models:

Model#
kW
Btu/h
Amps
Feed #1
Feed #2
EB-NB-72-600
72
245,736
70
-
EB-NB-84-600
84
286,692
81
-
EB-NB-108-600
108
368,604
93
12
EB-NB-120-600
120
409,560
93
24
EB-NB-144-600
144
491,472
93
46
EB-NB-160-600
160
546,080
154
-
EB-NB-200-600
200
682,600
154
39
EB-NB-240-600
240
819,120
154
77
EB-NB-300-600
300
1,023,900
154
139

480-Volt Three-phase models:

Model#
kW
Btu/h
Amps
Feed #1
Feed #2
EB-NB-84-480
84
286,690
101
-
EB-NB-108-480
108
368,600
116
15
EB-NB-120-480
120
409,560
116
29
EB-NB-144-480
144
491,470
116
58
EB-NB-160-480
160
546,080
193
-
EB-NB-200-480
200
682,600
193
48
EB-NB-240-480
240
819,120
193
96
EB-NB-300-480
300
1,023,900
193
169

208-Volt Three-phase models:

Model#
kW
Btu/h
Amps
Feed #1
Feed #2
EB-NB-60-208
60
205,463
167
-
EB-NB-75-208
75
255,975
209
-
EB-NB-105-208
105
358,365
292
-
EB-NB-150-208
150
511,950
334
84
EB-NB-180-208
180
614,340
334
167

240-Volt Three-phase models:

Model#
kW
Btu/h
Amps
Feed #1
Feed #2
EB-NB-60-240
60
204,780
145
-
EB-NB-75-240
75
255,975
181
-
EB-NB-105-240
105
358,365
253
-
EB-NB-150-240
150
511,950
289
73
EB-NB-180-240
180
614,340
289
145

Available Specification Sheet

BL801 Industrial Series Specification Sheet

Electro-Boiler Warranty Statement

     


Electro Industries, Inc., 2150 West River Street, PO Box 538, Monticello, MN 55362 (Map)
Phone: 800.922.4138 or 763.295.4138  Fax: 763.295.4434

Copyright 2016 Electro Industries, Inc. unless otherwise noted. All rights reserved.