NorAire Heat & Cool unit

Electric Boiler

EDB-T1 Series

20 to 36 kW

The Electro-Boiler® is a versatile and reliable electric heating solution for residential and small commercial applications, backed by a leading warranty and strong customer support.

EDB-T1 Series

20 to 36 kW

The Electro-Boiler is designed to meet the needs of all your hydronic or forced air applications from residential homes to small commercial buildings, shops and more…

Backed by an industry leading warranty and Electro’s commitment to customer service and support, the Electro-Boiler is one of the top choices of contractors and homeowners utilizing electric heat.

EDB-T1 Series Features

  • Element modulation for precise temperature control
  • Quiet solid state relays or DC power relays
  • Outdoor reset capability to save energy
  • Dual Fuel or Low Water Cut Off (LWCO) connection
  • Circuit breaker disconnects
  • Circulating pump relay (10-amp)
  • Includes front panel pressure/temperature gauge and relief valve
  • Incolloy elements for long lasting operation
  • Simple installation as no venting is required
  • Lightweight for easy wall-mounted installation
  • Low pressure drop equals no expensive primary/secondary piping, pumps, or control wiring
  • Low maintenance compared to gas boilers
  • Combine with an Electro Zone Control for high temp priority
  • ASME stamped vessel (built in accordance to ASME Section IV)
  • Warranty, single phase units:
    • 20-year element warranty
    • 20-year vessel warranty

EDB-T1 Series Applications

  • Radiant floor heat
  • Garage heat
  • Slab on grade homes
  • Radiant panel
  • Workshops
  • Basements
  • Upper level
  • Baseboard
  • Pole buildings
  • Staple-up radiant
  • Radiators
  • Snowmelt
  • Indirect domestic hot water
  • Applications requiring hot water up to 180°F

Electro-Boiler® Accessories

Electro-Boiler® Chip
T1 Models: 20kW to 36kW (68,000-122,800 Btu/h)
Electro offers a variety of accessories designed to simplify your Electro-Boiler installation and ensure efficient operation. Zone Controls for TS Series boilers will simplify wiring and offer unique performance enhancements such as specific BTU setting per zone, zone priority with high temp, and zone valve or zone pump control. Piping and pump kits provide exactly what you need to get started on a successful install that provides years of worry-free operation.

Zone Controls

Our zone controls are designed simplify wiring and enhance system performance by communicating zone information to the TS Series boilers. With unique “dial a BTU” switch, adjusting the BTU’s required for each zone is easy and allows the boiler to quickly adapt to the changing flow rates of different size zones. Optional Zone 1 priority allows heat to Zone 1 only. When two different water temperatures are desired for your system, switch to high temp priority and the boiler will increase output temperature (to 155° or 180°) for Zone 1. This allows you to direct pipe to radiant floor manifolds and a baseboard, radiator zone, or indirect domestic hot water tank. This can eliminate temperature mixing valves and simplify system piping.

Zone Controls with Enclosure & Transformer

  • EB-ZEA-1 – for applications of up to 4 zones, with isolated outputs; this board will control zone valves, zone pumps, or a combination of both
  • EB-ZEA-2 – adds 4 additional zones to the EB-ZEA-1
  • EB-ZEA8 – for applications of up to 8 zones, designed to control up to 8 zone pumps
  • EB-ZES8 – for applications of up to 8 zones, designed to control up to 8 zone valves (transformer not included)

Zone Controls without Enclosure or Transformer (designed to mount inside the TS Standard Series boiler)

  • EB-ZTA-1 – for applications of up to 4 zones, with isolated outputs; this board will control zone valves, zone pumps, or a combination of both

Other Accessories

Multi-Boiler Control – when using two or more TS Series boilers on a single radiant application, this control provides a simple, economical way to control all connected boilers to a single thermostat or operating control.

  • EB-C-STG5 – multi-boiler control

Heating Tools

WarmFlo® Analyzer

Installation & Troubleshooting Tools

WarmFlo® Analyzer

  • WF-ANZ7 – for forced air and Electro-Boilers
  • Verify temperature sensor function and accuracy
  • Monitor and adjust safety and efficiency settings
  • User friendly controls
  • Powers from control board, no batteries needed
  • Rugged construction and durable case

WarmFlo® Software

  • ET-SOFT-HTG – for Electro heating products, includes USB cable

Related Products

5 to 20 kW

EZB-Edge®

The EZB-Edge is a complete boiler system with interactive touch screen display 4-zone control.

20 to 36 kW

EZB-T1 EZBoiler®

This complete boiler system is available to deliver anywhere from 68,200 – 122,800 Btu/h.

1.1 to 18 kW

Mini EZBoiler®

The Mini EZBoiler® is a complete boiler system for a wide variety of hydronic heating applications.

20 to 36 kW

EDB-T1 Series

This Electro-Boiler is designed to meet the needs of all your hydronic applications.

1.1 to 18 kW

Mini-Boiler™

The Mini-Boiler has set the bar for electric boilers and it continues to be our most popular.

40 to 54 kW

Commercial Series

The Commercial Series boilers are designed to meet the needs of all your hydronic heating applications. WarmFlo® temperature control allows you to select a range of water temperature outputs.

60 to 300 kW

Industrial Series

This series is engineered to meet the global demand for safe, clean and less carbon.