EZB-T1 EZBoiler®

EZB-T1 EZBoiler Features

• kW output 20 to 36 kW
• Btu/h output 68,200 to 122,800 Btu/h
• Thermostat or end switch connection (R and W)
• Dry contact for load control (off-peak, TOU) or low water cutoff
• Dual Fuel or Energy Selector Switch
• Circulator switching relay – 10-amp maximum
• LED indicator lights
• Redundant safety limit controls
• 100% safe and efficient
• ETL/Intertek listed
• ASME H-Stamp Vessel (Built in accordance to ASME Section IV)
• 20-Year Vessel and Element Warranty

EZB-T1 EZBoiler Components Included

• ASME Pressure Vessel
• Incoloy Heating Elements
• Pressure/Temperature Gauge
• Temperature Sensors (Supply/Outdoor)
• Hi-limits:
  • 1st - automatic reset at 190°F
  • 2nd - manual reset at 205°F
• 30 psi Relief Valve
• Air Eliminator
• Pre-charged 12 psi Expansion Tank
• Circulating Pump, 3 speed ECM with Isolation Flanges
• 240 VAC circuit breakers for main power and 120 VAC breaker for circulating pump

EZB-T1 EZBoiler Applications

• Radiant floor heat
• Garage heat
• Slab on grade homes
• Radiant panel
• Workshops
• Basements
• Upper level
• Baseboard
• Pole buildings
• Staple-up radiant
• Radiators
• Snowmelt

EZB-T1 EZBoiler Accessories

Electro offers a variety of accessories designed to simplify your EZBoiler installation and ensure efficient operation. Zone Controls for TS Series boilers will simplify wiring and offer unique performance enhancements such as specific BTU setting per zone, zone priority with high temp, and zone valve or zone pump control. Piping and pump kits provide exactly what you need to get started on a successful install that provides years of worry-free operation.

Zone Controllers

Our zone controllers are designed simplify wiring and enhance system performance by communicating zone information to the EZB-T1 boilers. With unique “dial a BTU” switch, adjusting the BTU’s required for each zone is easy and allows the boiler to quickly adapt to the changing flow rates of different size zones. Optional Zone 1 priority allows heat to Zone 1 only. When two different water temperatures are desired for your system, switch to high temp priority and the boiler will increase output temperature (to 155° or 180°) for Zone 1. This allows you to direct pipe to radiant floor manifolds and a baseboard, radiator zone, or indirect domestic hot water tank. This can eliminate temperature mixing valves and simplify system piping.

Zone Controllers with Enclosure & Transformer

• EB-ZEA-1 – for applications of up to 4 zones, with isolated outputs; this board will control zone valves, zone pumps, or a combination of both
• EB-ZEA-2 – adds 4 additional zones to the EB-ZEA-1
• EB-ZEA8 – for applications of up to 8 zones, designed to control up to 8 zone pumps
• EB-ZES8 – for applications of up to 8 zones, designed to control up to 8 zone valves (transformer not included)

Zone Controllers without Enclosure or Transformer

• EB-ZTA-1 – for applications of up to 4 zones, with isolated outputs; this board will control zone valves, zone pumps, or a combination of both

Piping Kits

EZB-PF100, EZBoiler Kit – includes 1” threaded pipe nipples, dielectric isolation unions, and 3-way purge/fill valve assembly

Other Accessories

Piping Kits

EZB-PF100 - includes 1” threaded pipe nipples, dielectric isolation unions, and 3-way purge/fill valve assembly

Heating Tools

Installation & Troubleshooting Tools

WarmFlo® Analyzer

• WF-ANZ7 – for all forced air and TS Series boilers
• Verify temperature sensor function and accuracy
• Monitor and adjust safety and efficiency settings
• User friendly controls
• Powers from control board, no batteries needed
• Rugged construction and durable case

WarmFlo® Software

• ET-SOFT-HTG – for Electro heating products, includes USB cable