Electric Boiler
EZB-Edge®
Innovative Touch Screen Display
Along with Single and 4-Zone Control Options
The EZB-Edge®, part of Electro’s EZBoiler® line, is the complete solution for hydronic heating systems, designed with the contractor in mind. It is simply the easiest boiler to install!
EZB-Edge
The EZB-Edge is a complete boiler system for
radiant floor heating or hot water baseboard
applications. Since it is electric and no venting is
required, the system is safe to operate and can
be installed anywhere in the home. This provides
both safety and convenience to the homeowner.
Electro is committed to producing quality products
manufactured to the highest standards, and the
EZB-Edge is no exception.
The EZB-Edge replaces traditional piping with
boiler systems. Most major plumbing components
are integrated into one compact box, which saves
on installation labor and valuable wall or floor
space. Just hang the boiler on a wall and pipe
down to the radiant manifold; it’s that easy!
EZB-Edge Features
- kW Output 5 to 20 kW
- Btu/h Output 17,000 to 68,200 Btu/h
- Temperature Sensing
- WarmFlo Modulation Control
- Dual Fuel Control
- Outdoor Reset Capability
- Available in Single Zone or 4-Zone Controller for Valves or Pumps
- ETL/Intertek Listed
- ASME H-Stamp Vessel (Built in accordance to ASME Section IV)
- 2-Year Parts Warranty
- 20-Year Vessel and Element Warranty
EZB-Edge Components Included
- ASME Pressure Vessel
- Incoloy Heating Elements
- Pressure/Temperature Gauge
- Temperature Sensors: Supply, Return & Outdoor
- Auto Reset Hi-Limit, 190°F
- Manual Reset Hi-Limit, 205°F
- 30 psi Relief Valve
- Air Eliminator
- Pre-charged 12 psi Expansion Tank
- Circulating Pump with Isolation Flanges
- Circuit Breakers
- Touch Screen Control Board
EZB-Edge Applications
- Radiant floor heat
- Garage heat
- Slab on grade homes
- Radiant panel
- Workshops
- Basements
- Upper level
- Baseboard
- Pole buildings
- Staple-up radiant
- Radiators
- Snowmelt
EZB-Edge Accessories
Electro offers a variety of accessories designed to simplify your Electro-Boiler installation and ensure efficient operation.Piping Kits
EZB-PF100 – includes 1” threaded pipe nipples, dielectric isolation unions, and 3-way purge/fill valve assemblyOther Accessories
Single Feed Wiring Adaptor
This adaptor allows for a single 240VAC power feed to the boiler. Consult your boiler specification sheet to determine the number of disconnect breakers.
- 5701 – single feed to 2 breakers
- 5702 – single feed to 3 breakers
Related Products
5 to 20 kW
EZB-Edge®
The EZB-Edge is a complete boiler system with interactive touch screen display 4-zone control.
20 to 36 kW
EZB-T1 EZBoiler®
This complete boiler system is available to deliver anywhere from 68,200 – 122,800 Btu/h.
1.1 to 18 kW
Mini EZBoiler®
The Mini EZBoiler® is a complete boiler system for a wide variety of hydronic heating applications.
20 to 36 kW
EDB-T1 Series
This Electro-Boiler is designed to meet the needs of all your hydronic applications.
1.1 to 18 kW
Mini-Boiler™
The Mini-Boiler has set the bar for electric boilers and it continues to be our most popular.
40 to 54 kW
Commercial Series
The Commercial Series boilers are designed to meet the needs of all your hydronic heating applications. WarmFlo® temperature control allows you to select a range of water temperature outputs.
60 to 300 kW
Industrial Series
This series is engineered to meet the global demand for safe, clean and less carbon.